Tempo Inc.

A robust standard low profile valve box with snap-in lid. Ideal for shallow pipe and valve installations with a height of 6.75" (compared to a normal jumbo box height of 12.50"). Used as a durable enclosure to protect and provide easy access to valves or subsurface components of an irrigation...

A robust rectangular valve box with snap-in lid. Used as a durable enclosure to protect and provide easy access to valves or subsurface components of an irrigation system. Has overlapping lid to prevent dirt from lodging between lid and body.

A robust round valve box with snap-in lid. Used as a durable enclosure to protect and provide easy access to valves or subsurface components of an irrigation system. Has overlapping lid to prevent dirt from lodging between lid and body.

A Catch Basin manufactured from High Impact Polystyrene (HIPS) which is used to collect and discharge excess water in order to prevent potential damage to landscapes and property.

A robust, flat drain manufactured from a structurally foamed High Density Polyethylene (HDPE) with a UV inhibitor to reduce sun damage. This grate is designed with large opening slots for maximum flow while still preventing large debris from entering the drainage system. Capable of withstanding pedestrian,...

Y-Filters are used to protect drip emitters, dripperline, sprayers, bubblers and misters from sand, silt and other impurities that may clog them over time. Filters are typically installed between the vacuum breaker and pressure regulator. Proper water filtration is essential for the efficient operation...

Pressure compensating drip emitters (PC Emitters) deliver a consistent output of water, even with changes in elevation or pressure due to long drip runs. These drip irrigation emitters are best used in landscapes and gardens that have changes in elevation or longer drip runs that would otherwise lead...

1/4" Micro-f"ttings are used to make connections between 1/4" micro-tubing or to connect 1/4″ micro-tubing or 1/4" dripperline to 1/2" or 3/4" poly supply tubing. Made with an engineering grade resin, these fittings include a sharp edge (known as a barb) that bites into...

A pop-up water relief valve (also commonly known as a pop-up drainage emitter) that is normally closed except when there is a build up of hydrostatic pressure. As the drainage pipes fill and build up slight pressure, the cover rises to allow the excess water to escape. Once the water is discharged the...

Micro-tubing (also known as spaghetti, feeder or distrbution tubing) is available in a variety of sizes, coil lengths and materials (polyethylene or vinyl). The polyethylene (Linear Low Density Polyethylene) is stronger and a little stiffer and works well in all weather with the barbed micro-fittings...