Ennis-Flint - PPG Industries

Developed for use from early spring until late Fall, Low Temp is a fast drying waterborne traffic paint marking that can be applied at temperatures as low as 35°F

Engineered to meet your specification, Ennis-Flint waterborne and solvent based traffic paints are for use on streets, highways,...

DuraSheen® dirt resistant traffic paint has been specially formulated to give excellent durability while at the same time being extremely resistant to oil, grease, and other road residues. The 100% acrylic , UV stable composition makes this traffic paint product ideal for streets and highways, curbs,...

High Build traffic paint is formulated for increased durability and retroreflectivity through greater film build. Unlike standard traffic paints, High Build traffic paint utilizes an acrylic cross-linking emulsion that allows for applications of up to 30 wet mils.

When cured, High Build...

Fast Dry waterborne traffic paint is a user friendly, high solids, traffic marking formulated specifically for use in both airless and conventional air-atomized striping equipment. Fast Dry traffic paint offers all of the benefits of a water reducible paint, and quickly dries to a no track condition...

Standard Dry Waterborne traffic paint is a user friendly traffic marking designed specifically for curbs and parking lots as well as other interior and exterior concrete and asphalt surfaces. Standard Dry traffic paint is ideal for use in smaller airless and conventional striping equipment and is formulated...

TrafficPatterns® interconnected surface system gives designers the flexibility to create their ideal streetscape design with interconnected sheets of custom color and pattern combinations. TrafficPatterns durable preformed thermoplastic provides a cost-effective alternative to brick and stone pavers...

TrafficPatternsLT® is a preformed thermoplastic pavement marking material that provides a more durable and skid-resistant surface than typical epoxy coatings or paint. Preformed Thermoplastic application is simple with a propane heat torch or an infrared heater.

It can be applied over...

The 2004 Standard Highway Signs Book published by the FHWA included the addition of interstate shields in the form of pavement markings. Since that time, there has been a growing use of these "horizontal surface signs" in lieu of or as a supplement to the typical shoulder-mounted or overhead...

TrafficPatternsXD® is an extremely durable preformed thermoplastic material that incorporates a unique aggregate-reinforced formula with unprecedented wear resistance. Supplied at 150 mil thickness, the 2' x 2' sheets of material are easily positioned, heated, and then stamped into the asphalt...

PreMark® Storm Drain Markings are designed to educate the public and increase awareness about the dangers of pollutants flowing into our water system. These markings include messages such as "No Dumping! Drains to Ocean" and "No Dumping! It Kills".

DecoMark® is surface applied and does not alter or impair the substrate. The application does not require expensive capital equipment, customized tools, templates, or grids. DecoMark® provides extensive uses at many places.

DuraTherm® is a specially-designed preformed thermoplastic material that is inlaid into an imprinted asphalt surface and thermally bonded using specialized infrared heaters.

TrafficPatterns® is a durable preformed thermoplastic pavement marking material used primarily for streetscape and traffic calming purposes on public roads and private properties. It provides a cost-effective alternative to the use of brick and stone pavers because the material is surface applied...

TrafficPatternsGF (Grout Free) is a durable preformed thermoplastic pavement marking material used primarily for streetscape and traffic calming purposes on public roads and private properties. TrafficPatternsGF provides a cost-effective alternative to the use of brick and stone pavers because the material...

TrafficScapes® preformed thermoplastic pavement marking materials allow you to make a customized, impactful, and permanent statement with your streetscape or traffic calming project.

TrafficScapes® preformed thermoplastic pavement marking materials allow you to make a customized, impactful, and permanent statement with your streetscape or traffic calming project.

TrafficPatterns® is a durable preformed thermoplastic pavement marking material used primarily for streetscape and traffic calming purposes on public roads and private properties.

The PreMark® Preformed Thermoplastic Manhole Protection Ring Systems are designed with a subtle incline that provides smooth, damage-free ride for daily traffic. Each ring is made of durable non-beaded 125 mil. PreMark® preformed thermoplastic material. As many as three Preformed Thermoplastic...

StreetHeat® is the ability to create an impression into the asphalt surface using a combination of heat, a wire rope stamping template, and a plate compactor. This can be achieved by working behind a paver or reheating the asphalt with Ennis-Flint® patented Infrared StreetHeat® asphalt reheating...

Ride-A-Way® is an epoxy-modified, acrylic, waterborne coating specifically designed for the colorization of preferential lanes on streets and highways. Now gaining greater momentum in North America, bike lanes and bus lanes are incorporated into state, regional, and local transportation plans due...

MMAX™ Area Markings are a specialized system that combines state-of-the-art Methyl Methacrylate resins with hardwearing aggregate and premium pigments.

MMAX™ Area Markings delineate bike lanes, bus lanes and parklets and is ideal for long lane areas with low to high vehicle traffic.

HPS®8 is a unique binder system made up of multiple polymers to give it very high durability, long term retroreflectivity, and fast cure, yet can be applied with standard thermoplastic equipment. HPS®8 is applied using the extrude method at thicknesses ranging from 60 to 120 mils.

HPS®8...

HotTape® Preformed Thermoplastic Lines, Legends and Arrows are supplied in 90-mil and 125-mil thicknesses. Yellow and white linear material is also available in 90-mil rolls. HotTape® Preformed Thermoplastic is available in standard FHWA designs that are compliant with the Manual on Uniform Traffic...

Preformed Thermoplastic HotSpots are 5-inch squares of HotTape® material used for adhering raised pavement markers (RPM). Application using a propane heat torch is the same as other HotTape Preformed Thermoplastic markings on concrete and asphalt (see HotTape® Application Instructions for details).

No...