Ennis-Flint - PPG Industries

HPS®3 plural components provide durable long line delineation with outstanding adhesion to concrete and asphalt. HPS®3 is a plural component, durable liquid pavement marking system that dries to 100% solid line in ten minutes or less.

An application thickness of 20 mils provides...

TrafficPatterns® interconnected surface system gives designers the flexibility to create their ideal streetscape design with interconnected sheets of custom color and pattern combinations. TrafficPatterns durable preformed thermoplastic provides a cost-effective alternative to brick and stone pavers...

PreMark preformed thermoplastic bike boxes and bike panels are designed for use in areas where bicycle and vehicular conflict are expected and added safety is needed.

DecoMark® is surface applied and does not alter or impair the substrate. The application does not require expensive capital equipment, customized tools, templates, or grids. Maximize traffic guidance, increase brand awareness, enhance community pride, and promote school spirit with durable preformed...

The Magnum Torch with self-contained torch ignition is a wide mouth propane torch for applying preformed thermoplastic pavement markings such as HotTape®. Torch assembly must be used with a D.O.T. approved container equipped with a U.L. listed shut-off valve. It is important to always use the two-hand...

HPS®4 plural components are a modified urethane epoxy formulated to help increase roadway safety through durability, retro-reflectivity, and rapid cure speeds. Engineered for durability and vaue in a wide range of traffic striping applications, HPS®4 plural components can be applied using current...

PreMark® Preformed Thermoplastic Lines, Legends and Arrows are supplied at 125-mil thickness to ensure their desired service life and cost effectiveness. PreMark® Preformed Thermoplastic linear material is sold in flat packs of 3 ft. lengths and widths from 4 inches up to 24 inches.

PreMark®...

With its patented cold burning nozzle, the Ennis-Flint® 3000 EX propane heat torch is safe and comfortable to use even in the most extreme temperatures. This UL-listed heat torch features an electric ignition, hand guard, deadman trigger, and an automatic POL valve for maximum safety.

The...

Formulated to meet AASHTO as well as many state specifications Pavemark™ Hot-Applied Thermoplastic is the workhorse line of hot-applied thermoplastic. User-friendly Pavemark™ is formulated for fast melting and easy application allowing for maximum production while in the field.

Hot-Applied...

Thermo-Quik® thermoplastic is formulated for spray application at thicknesses of 30 - 40 mils. Thermo-Quik® makes an excellent maintenance coating for touching up worn traffic lines or as a paint alternative for skip lines, edge lines, or centerlines. When matched with the proper glass bead,...

Permaline® is an outstanding thermoplastic traffic marking formulated for use on asphalt and concrete without the need of a primer. Permaline's excellent bond strength and flexible film make it an ideal choice for high ADT concrete roadways. Permaline® is compatible with other Ennis-Flint's...

Vibraline® is a specialized hot-applied thermoplastic road marking material, which can be used as a profiled edge line marking to enhance wet night visibility and provide a "rumble strip" sensory and auditory impulse to the motorist.

Vibraline® offers safety benefits in poor...

AirMark® is a durable preformed thermoplastic pavement marking material for airside use at Part 139 and GA Airports. Whether the need is for linear delineation or horizontal surface signage, AirMark® is best suited for markings such as taxiway, hold position, geographic position, vehicle roadway,...

EF Series Glass Beads are engineered for high retroreflectivity.

Standard beads are made from 100% recycled glass. The high clarity of the beads and the absence of air inclusions brings retroreflection values up to 500 mcd.

EF Series Glass Beads are engineered for high retroreflectivity.

Glass beads can be ordered in 3 Performance Classes - tailor made for every kind of performance requirement. The Performance 200 Classes combine the advantages of S100 and HP300 - high retroreflection for an economical price.

EF Series Glass Beads are engineered for high retroreflectivity.

High Performance beads are made from 100% virgin glass. Due to their size, the high roundness (up to 98%), and superior glass composition, expect the highest level of retroreflection, especially in wet-night conditions. HP300...

HPS®7 Structured is based on proven methyl Methyl methacrylate (MMA) technology. MMA is one of the most durable pavement marking material available anywhere today. HPS®7 Structured MMA is designed for application via a unique splatter pattern technique that creates peaks and valleys. The peaks...

HPS®6 is based on proven methyl methacrylate (MMA) technology. MMA is one of the most durable pavement marking material available anywhere today. HPS®6 MMA can be screed applied, profiled, extruded, and sprayed at various film thicknesses ranging from 10 to 500 mils.

HPS®6 can...

PreMark® Preformed Thermoplastic Handicap Markings with ViziGrip® are virtually maintenance free and durable enough to last 6 to 8 times longer than painted surfaces. These high-visibility Preformed Thermoplastic Markings are ADA compliant and off er high skid resistance for pedestrian safety...

HPS®2 plural components are the benchmark for slow cure epoxy pavement marking materials. HPS®2 plural components provide durable long line delineation with outstanding adhesion to concrete and asphalt. HPS®2 is a plural component, durable liquid pavement marking system that dries to 100%...

The quality and performance of pavement markings have increased in recent years thanks to better paint and thermoplastic materials and higher performing glass beads. In addition new, marking types have improved in particular the performance during wet conditions at nighttime by allowing better run-off...

Government agencies recognize the challenges in trying to objectively evaluate pavement markings for nighttime visibility and color. Many agencies have set numerical standards and implemented performance-based safety management programs to help reduce accidents, save money, and provide valuable data...

The DELTA LTL-M is a robust, reliable and advanced instrument designed for measuring all types of road markings at a simulated distance of 98 Feet with the highest level of accuracy. The LTL-M should be mounted to a vehicle for measuring retroreflectivity at normal traffic speeds, giving you the full...

Engineered to meet your specification, Ennis-Flint waterborne and solvent based traffic paints are for use on streets, highways, local roads and private properties.

Environmentally friendly and lasting pavement markings, waterborne traffic paint is based on proven acrylic emulsion technologies...

Developed for use from early spring until late Fall, Low Temp is a fast drying waterborne traffic paint marking that can be applied at temperatures as low as 35°F

Engineered to meet your specification, Ennis-Flint waterborne and solvent based traffic paints are for use on streets, highways,...

DuraSheen® dirt resistant traffic paint has been specially formulated to give excellent durability while at the same time being extremely resistant to oil, grease, and other road residues. The 100% acrylic , UV stable composition makes this traffic paint product ideal for streets and highways, curbs,...

High Build traffic paint is formulated for increased durability and retroreflectivity through greater film build. Unlike standard traffic paints, High Build traffic paint utilizes an acrylic cross-linking emulsion that allows for applications of up to 30 wet mils.

When cured, High Build...

Fast Dry waterborne traffic paint is a user friendly, high solids, traffic marking formulated specifically for use in both airless and conventional air-atomized striping equipment. Fast Dry traffic paint offers all of the benefits of a water reducible paint, and quickly dries to a no track condition...

Standard Dry Waterborne traffic paint is a user friendly traffic marking designed specifically for curbs and parking lots as well as other interior and exterior concrete and asphalt surfaces. Standard Dry traffic paint is ideal for use in smaller airless and conventional striping equipment and is formulated...

TrafficPatterns® interconnected surface system gives designers the flexibility to create their ideal streetscape design with interconnected sheets of custom color and pattern combinations. TrafficPatterns durable preformed thermoplastic provides a cost-effective alternative to brick and stone pavers...

TrafficPatternsLT® is a preformed thermoplastic pavement marking material that provides a more durable and skid-resistant surface than typical epoxy coatings or paint. Preformed Thermoplastic application is simple with a propane heat torch or an infrared heater.

It can be applied over...

The 2004 Standard Highway Signs Book published by the FHWA included the addition of interstate shields in the form of pavement markings. Since that time, there has been a growing use of these "horizontal surface signs" in lieu of or as a supplement to the typical shoulder-mounted or overhead...

TrafficPatternsXD® is an extremely durable preformed thermoplastic material that incorporates a unique aggregate-reinforced formula with unprecedented wear resistance. Supplied at 150 mil thickness, the 2' x 2' sheets of material are easily positioned, heated, and then stamped into the asphalt...

PreMark® Storm Drain Markings are designed to educate the public and increase awareness about the dangers of pollutants flowing into our water system. These markings include messages such as "No Dumping! Drains to Ocean" and "No Dumping! It Kills".

DecoMark® is surface applied and does not alter or impair the substrate. The application does not require expensive capital equipment, customized tools, templates, or grids. DecoMark® provides extensive uses at many places.

DuraTherm® is a specially-designed preformed thermoplastic material that is inlaid into an imprinted asphalt surface and thermally bonded using specialized infrared heaters.

TrafficPatterns® is a durable preformed thermoplastic pavement marking material used primarily for streetscape and traffic calming purposes on public roads and private properties. It provides a cost-effective alternative to the use of brick and stone pavers because the material is surface applied...

TrafficPatternsGF (Grout Free) is a durable preformed thermoplastic pavement marking material used primarily for streetscape and traffic calming purposes on public roads and private properties. TrafficPatternsGF provides a cost-effective alternative to the use of brick and stone pavers because the material...

TrafficScapes® preformed thermoplastic pavement marking materials allow you to make a customized, impactful, and permanent statement with your streetscape or traffic calming project.

TrafficScapes® preformed thermoplastic pavement marking materials allow you to make a customized, impactful, and permanent statement with your streetscape or traffic calming project.

TrafficPatterns® is a durable preformed thermoplastic pavement marking material used primarily for streetscape and traffic calming purposes on public roads and private properties.

The PreMark® Preformed Thermoplastic Manhole Protection Ring Systems are designed with a subtle incline that provides smooth, damage-free ride for daily traffic. Each ring is made of durable non-beaded 125 mil. PreMark® preformed thermoplastic material. As many as three Preformed Thermoplastic...

StreetHeat® is the ability to create an impression into the asphalt surface using a combination of heat, a wire rope stamping template, and a plate compactor. This can be achieved by working behind a paver or reheating the asphalt with Ennis-Flint® patented Infrared StreetHeat® asphalt reheating...

Ride-A-Way® is an epoxy-modified, acrylic, waterborne coating specifically designed for the colorization of preferential lanes on streets and highways. Now gaining greater momentum in North America, bike lanes and bus lanes are incorporated into state, regional, and local transportation plans due...

MMAX™ Area Markings are a specialized system that combines state-of-the-art Methyl Methacrylate resins with hardwearing aggregate and premium pigments.

MMAX™ Area Markings delineate bike lanes, bus lanes and parklets and is ideal for long lane areas with low to high vehicle traffic.

HPS®8 is a unique binder system made up of multiple polymers to give it very high durability, long term retroreflectivity, and fast cure, yet can be applied with standard thermoplastic equipment. HPS®8 is applied using the extrude method at thicknesses ranging from 60 to 120 mils.

HPS®8...

HotTape® Preformed Thermoplastic Lines, Legends and Arrows are supplied in 90-mil and 125-mil thicknesses. Yellow and white linear material is also available in 90-mil rolls. HotTape® Preformed Thermoplastic is available in standard FHWA designs that are compliant with the Manual on Uniform Traffic...

Preformed Thermoplastic HotSpots are 5-inch squares of HotTape® material used for adhering raised pavement markers (RPM). Application using a propane heat torch is the same as other HotTape Preformed Thermoplastic markings on concrete and asphalt (see HotTape® Application Instructions for details).

No...