Get the Skinny on Mini Loaders

Mini loaders provide unmatched traction in wet or muddy areas, allowing you to get the job done even in the worst conditions. Landscape contractors no longer have to get stuck or leave tire ruts through the mud. Rubber track undercarriages provide improved traction and better floatation, even in soft, wet or muddy conditions with minimal ground disturbance.

Ramrod Equipment

Model No.: Taskmaster 1150
Engine and Horsepower: Kawasaki liquid cooled gas 27 hp
Weight: 2,285 lbs.
Height, Length, Width: 50.2” by 61” by 43.5”
Operating Load: Lift capacity 1,150 lbs. to a height of 6 feet, carrying capacity 2,300 lbs.
Accessories: Complete with standard bucket; more than 40 ?EUR??,,????'??Quick-On, Quick-Off?EUR??,,????'?? versatile attachments.
Special Features: Self-leveling lift arms; 6.5 inches of under clearance; all-day fuel capacity; 85 degree bucket dump angle; single hand palm steering; powder coat paint finish; panel indicates low fuel, low hydraulic oil; hour meter.
Warranty: 1 year on Taskmaster, 6 months on attachments
Cost: $21,573

Ditch Witch

Model No.: SK650 Mini Skid Steer
Engine and Horsepower: Kubota D1105 -T Diesel 31 hp
Weight: 2,800 lbs.
Height, Length, Width: 53” by 82” by 35. 5”
Operating Load: 650 lbs.
Accessories: Over 70 attachments available
Special Features: High auxiliary HP output, pilot control, high lift in its class
Warranty: Standard warranty with extended option available
Cost: $20,000 – $23,000

Thomas Equipment

Model No.: 35DT
Engine and Horsepower: Kubota D1105 25 hp
Weight: 930 lbs.
Height, Length, Width: 51.25” by 79.75” by 42”
Operating Load: 600 lbs.
Accessories: Hydraulic controls lockout, traction drive lockout, boom support, work light, shielded hydraulic hoses, lifting lugs, transportation tie downs, padded operator area.
Special Features: Universal attachment mounting system allows mounting of most attachments; power selector valve allows operator direct hydraulic power when needed; combiner valve allows coupling the output of both the loaders hydraulic pumps for maximum output. Warranty: 2 years engine, 1 year machine
Cost: $18,000

Ingersoll Rand

Model No.: Bobcat MT55 Mini Track Loader
Engine and Horsepower: Kubota diesel 23.5 hp
Weight: 2,679 lbs.
Height, Length, Width: 49.1” by 72.4” by 41.5”
Operating Load: 550 lbs.
Accessories: 18 different attachments including stump grinder and tiller attachments; 12 gpm auxiliary hydraulic flow; 2,900 psi hydraulic system; Bob-Tach mounting system.
Special Features: Ride-on platform option, offering both ride-on and walk-behind capabilities; operators can maximize space on trailers by detaching the platform.
Warranty: 2 years engine, 1 year machine
Cost: $17,975

The Toro Co.

Model No.: 22311 Dingo 220
Engine and Horsepower: Kohler 20 hp
Weight: 1,576 lbs.
Height, Length, Width: 48.7” by 62” by 40.5”
Operating Load: 515 lbs.
Accessories: Removable counterweight allows for maximum lift capacity or maximum down pressure to enhance performance for any task; rubber track system that fits over special tires on the Dingo for increased floatation and traction in difficult conditions.
Special Features: Operator can select low or high speed ground speed; 12 gpm at 3000 psi hydraulic system gives you incredible hydraulic power to auger up to 30” holes or trench 36” deep; 2-Pump Hydraulic System for independent power that can be supplied to the attachment or the wheels.
Warranty: 2 years engine, 1 year machine
Cost: $12,525

Power Points

1: Meter, width of openings that can be navigated by mini loaders. Additionally, mini loaders can be driven through openings as small as two meters high. Source: Dig Safely New York