National Vendors
Regional Vendors
Sign up for LAWeekly newsletter
Long Lasting LEDs - No more burned out bulbs to replaceEconomical - 40000 Hour Life (almost 14 years 8 hrs lit per day)Low Power - 2 Watts per unit (2) 1-watt Phillips CMD LEDsDurable Construction - Powder Coated 304 Stainless Steel will not Rot or Rust. Can also be used in salt spray applications.Weather Resistant - Sealed Rustproof ideal for Outdoor UseSAFE - Cool to the touch ... Low Burn RiskLong Wire - 72 (182 cm) Lead with UL/18-2 SPT Low Voltage Cable (UL Rated) 3/8 (1 cm) Stripped and tinned (soldered) for easy connections to power feed cable. Will fit through a hole. Easy to Install - Simply slip under the cap stone on Block Walls Columns or Stairs (Before gluing down cap). Versatility - Use with Steps Walls Columns or Counter Tops.Connects to any 12 Volt AC or DC TransformerLightweight but super strong 6.5 oz eachNo more wasted block from cutting chiseling like needed for some light fixtures installations!Installs in Minutes under coping- NO Cutting NO Drilling!Can be retrofitted or installed lower in the wall as well. (See New Design below)Each Phillips LED Unit has (2) 1-Watt flat CMDs (Latest Technology) WARM White LEDs producing 27 lumens 3000 or 4000 Kelvin with a built in driver/rectifier.Optimum Voltage is 12 v AC/DC but will operate in a range voltage from 8-12.5 v AC/DCThe weather sealed LED unit is secured by two 3mm x 10mm stainless steel studs with two stainless steel nuts Space fixtures from 36 to 72 apart (depending upon amount of lighting desired)Fixture measures 5 9/16 (15 cm) Wide x 3 1/8 (8 cm) Deep x 1/32 (1 mm) ThickLED unit flange stick out 5/8 (2 cm) from the mounted surface with a 1/2 (1.25 cm) reveal Use with any coping that has a 1 or greater overhang Units can be painted (by you) to match any decor situation. PLEASE ... Install test lights before coping or cap is glued down.Fixtures Blend into the Landscape (see photos below)Conforms to UL STD 1838 Certified to CSA C22.2 No. 250.7NEW DESIGN - Allows you to retrofit lighting into existing installations easily. The Wall Eye II installs into your masonry crack with a simple 7 circular saw with a masonry blade to create the mounting space and a 1/4 masonry bit to feed the wire through.
12 Crestway Hamden, CT 06514-1141 203-288-3711 Fax: 203-288-3213 shop.tjb-inc.com
Products From TJB Inc.
Wall Eye II® - Warm LED Lights
Wall Eye II® - Cool LED Lights
Retaining Wall, Column & Stair Lights
Wall Eye II Transformer & Wire Set
Solar Brick Paver
Wall Eye II - Replacement LED Module - Cool
Solar Brick Light
Wall Eye II
Warm Light
SPCTiffanyGrape
Kerr Lighting 12 Volt Deck Lights
Kerr Lighting Residential Paver Lights
12 Volt Outdoor Transformers W/ Photocell & Timer Controls
For use with any retaining wall, column, counter top, or stair system that has an overhanging top stone or coping that these lights can be mounted under. Provide a WARM white (pure) light (3000 Kelvin) that is aimed down across the front of the face of a retaining wall or column creating wonderful interesting...
For use with any retaining wall, column, counter top, or stair system that has an overhanging top stone or coping that these lights can be mounted under. Provide a COOL white (pure) light (4500 Kelvin) that is aimed down across the front of the face of a retaining wall or column creating wonderful interesting...
Wall Eye ll is a 12 V, AC/DC, 2 W, LED, Stainless Steel fixture that is only 1/32-inch thick and mounts under any retaining wall, coping stone or step tread. Available in Warm or Cool LED and 4 finishes (Black, Brown, Gray, Brushed Stainless).
To help our customers with the correct transformer & wire selection for the Wall Eye II lights that we offer, we have come up with a select transformer and length of wire that will handle most Wall Eye II installations. We have found after 1,000's of sales that most customers want a transformer with...
Solar Brick Paver & Landscape Light featuring the Solar Module System for years of worry free operation. Install into wherever ground accent lighting is desired.
These LED modules are a direct replacement for the LED unit on any Wall Eye II Light. The LED module can also be used in many other applications where a low wattage draw fixture is needed to provide light using a 12 volt (AC or DC) power source.
...
For down lighting the face of a wall, or safety on stairs, we offer "WALL EYE II" which are a 12 volt (2 watt) LED fixture which is only 1/32" thick with a 1/2" reveal that mounts under any retaining wall coping stone or step tread. These energy efficient lights come in a Cool (4000 K) White LED or a...
Provide a WARM white light that is aimed down across the front of the face of a retaining wall or column creating interesting shadow patterns on the stone.
These beautiful Solar Tiffany-Style "California Grape" Lights with Dual-LEDs fit 4" x 4" posts as caps & add a charming touch to your bridge, porch, fence, or any outdoor area.
Give your wooden or Trex deck and dock areas the necessary directional lighting, as well as an attractive, sophisticated appearance. Base is a neutral colored tan.
Taking an enchanting moonlight walk along your carefully manicured walkways and pathways can be a challenge without the helpful guidance of Walkway Lights or Path Lights. Even when the moon is full, there may not be enough light to prevent you or your companion from accidentally stepping off of the path...
Several Sizes & Style Available: 45 Watt - 600 Watt Some with remote Photocells & Digital Timer/Controls
Sign up to receive Landscape Architect and Specifier News Magazine, LA Weekly and More...
Invalid Verification Code
Please enter the Verification Code below
You are now subcribed to LASN. You can also search and download CAD files and spec sheets from LADetails.
Log in to download product information or to manage your profile.
Need help? Call 714-979-5276
An email has been sent to . You will receive a confirmation email shortly confirming the information sent. Thank you.