FMI Equipment

The Multi-Purpose, Two-In-One Drop-Deck & Dump Trailer
The widely popular 3D (Drop-Deck & Dump) model is the world's only trailer of its kind - offering the dual-purpose flexibility of being both a drop-deck and dump trailer all in one heavy-duty vehicle. With a...

Used to backfill trenches and minimize ground disturbance from blade gouging 46.5″ (118 cm) auger width; 56.5″ (143.5 cm) overall width 12″ (30.5 cm) diameter auger with centered auger opening Dynamic drive with 4″ (10.2 cm) center opening 7.5″ (19 cm) vertical travel to...

Eliminates need to manually move hardscape materials Accommodates pavers and materials of different shapes and sizes automatically Accommodates granite or concrete steps up to 48″ (122 cm) long Single cylinder powers two self-adjusting grapple arms with rubber gripping pads Cylinder check valve...

Designed to easily remove small trees, shrubs and ornamentals Eliminates the entire stump, tap root and secondary root system in a single operation It's as easy as dig, clamp, roll-up, lift and remove - without hand labor Grasp and move vegetation for clean-up and collection with the 20.5″...

The 700HDX features a unique hydraulically expandable undercarriage — from 35″ (89 cm) to 43.5″ (111 cm) — allowing the operator to retract the undercarriage for passages as narrow as 36″ (91 cm) wide then expand for increased stability while in operation by simply pulling...

Ideal for residential tree services, utility line clearing, vegetation management, maintenance contractors and municipalities, this high-capacity, high-production chipper includes more standard features than any other chipper in its class. Many customer-inspired innovations are featured on the Eeger...

With its high capacity and economical design, the compact Eeger Beever 1621 chipper is the ideal unit for residential tree services, utility line clearing, vegetation management, maintenance contractors and municipalities. The 8.2 lb., 6" (3.7 kg, 15.2 cm) channel frame rails increase structural...

With its power and easily transportable design, this compact and economical chipper is the ideal unit for utility line clearing, residential tree services, rental yards and municipalities. The Eeger Beever 1418's 18" (45.7 cm) diameter single top feed wheel with straight flow-through infeed design...

Perfect for utility line clearing, residential tree services, rental yards and municipalities, this powerful and compact model is easy to maneuver. The Eeger Beever 1415 is also available with tracks for right of way clearing, highway clean-ups and hard to reach areas requiring a self-propelled unit...

With its power and easily transportable design, the compact and economical Eeger Beever 1215 chipper is the ideal unit for utility line clearing, residential tree services, rental yards and municipalities. The dual-sided, chambered air impeller system increases chip-throwing velocity and reduces dust...

Perfect for rental yards, landscapers, golf courses and pruning crews, the high-capacity Eeger Beever 812 Brush Chipper is easy to transport and operate. Plus, it's the only chipper in its class to combine both a wide infeed chute opening and 1.25" (3.17 cm) thick chipping disc for a greater...

Designed primarily for the rental market, as well as small independent contractors, the 7″ (18 cm) capacity Boxer X7 is engineered to be easy to use, easy to tow and easy to maintain. The simplified design of this chipper in no way reduces its productivity. The X7 is a powerful, aggressive chipper...

The Beever M20R Brush Chipper is ideal for entry-level biomass production, lot and land clearing contractors, contractors and large tree services, this high-capacity, high-production chipper has more standard features than any other chipper in its class and is offered in a variety of configurations for...

Beever M15RX Brush Chipper is ideal unit for residential tree services, utility line clearing, vegetation management, maintenance contractors and municipalities, this high-capacity chipper is now on a compact, lighter weight design platform. The 8.2 lb., 6" (3.72 kg., 15.24 cm channel) channel frame...

The RG80-R has a powerful 85-hp ford engine with a hydrostatic cutter wheel drive. Command Cut lets the operator vary the swing speed independently from engine speed while maintaining maximum torque and horsepower. The propel system features Hi and Low travel speeds plus an integrated "creep mode"...

Powered by a 24.8-HP (18.5-kW) diesel engine and producing 11.3 gpm (43 l/min) of auxiliary hydraulic flow from the single remote auxiliary lines, this model provides all the power needed for tough jobs. The 600HD features a 74″ (188 cm) hinge pin height and a 531 lb. (241 kg) rated operating capacity,...

Rayco's tow-behind stump cutter line has a heritage that stretches over 35 years. The RG74DXH represents the evolution of that heritage. Its 74-hp Cummins Diesel engine, large cutting dimensions and plenty of chip capacity mean it's equipped to tackle jobs of any size. The reliable hydrostatic...

When it comes to engines, there's just no replacement for displacement. The Rayco RG74T-R is a high-production stump cutter powered by a massive 3.8L Cummins 74hp diesel engine that generates peak torque of 295ft-lbs. The large displacement diesel engine delivers more cutting power than most 100-hp-class...

Rayco pioneered the market with hydrostatic drive stump cutters and our flagship RG70X and RG100X offer the ultimate in backyard stump cutting performance. They use powerful Kubota diesel engines in 66.8 hp (RG70X) and 99.2 hp (RG100X) and have hydrostatic cutter wheel drive to let the operator vary...

The RG55 features a gasoline Kubota engine, 4-wheel drive and a hydraulic backfill blade. Operators appreciate the large cutting dimensions as well as the visibility and protection of the swing-out control station. For travel through gates, the control station swings in line. Wide floatation tires and...

The Super Jr stump cutter is the original self-propelled, backyard stump cutter that professionals have relied on since 1986. Today, there's a Super Jr model to fit every job and every budget. The Super Jr comes with gasoline engine power options of 27 HP (20.1 kW) and 37 HP (27.6 kW). To maximize...

The RG37T is an excellent stump cutter for those who need a compact machine that has traction to get where tires just won't take you. The rubber track undercarriage provides excellent traction while maintaining a low ground pressure. Unlike other track stump cutters, the Trac Jr's short track...

There's a Super Jr model to fit every job and every budget. The Super Jr comes with gasoline engine power options of 27 HP (20.1 kW) and 37 HP (27.6 kW). To maximize visibility while cutting, all Super Jr's have the drivetrain located on the far side of the cutter wheel. And Rayco's exclusive,...

For over 20 years, Rayco's Mini Work-Force line has been a staple in the rental equipment market and with professional contractors looking for a compact stump cutter. Their commercial grade construction and long history of service means you can count on Rayco to be there for service needs, year after...