Calsense

Calsense 2-Wire CS-3000 controller unlocks new levels of flow management with 2- and 3-level bypass manifolds. It also teaches you about your soil; not just moisture level, but electrical conductivity as well. It also offers a new hardware platform for plug-n-play operation and ease of use, with software...

Calsense 2-Wire unlocks new levels of flow management with 2- and 3-level bypass manifolds. It also teaches you about your soil; not just moisture level, but electrical conductivity as well.

The Calsense Hub, model CS3-HUB, provides the same benefits as the CS3000 irrigation controller but also includes the ability to share a communication link back to the cloud using radio technology. A single hub can manage communication with hundreds of controllers including ET2000e and ET2000 controllers.

Using a mobile-optimized version of the site, users can also turn stations on and off on CS3000 controllers using their smart phone or tablet. Along with the ability to turn on up to six-valves simultaneously, it provides real-time flow information, details if a mainline break occurs, and real-time weather...

The Calsense Command Center Online offers flexibility to manage resources through a web browser from any internet-connected device including PC's, Macs, smartphones and tablets providing valuable report analytics at your fingertips. This fully-featured web application provides communication using...

The model CS3-W-KIT is a CS3000 weather card and terminal board. This kit allow for the connection of an ET Gage (model ETG), a Tipping Rain bucket (model RB-1) and a Wing Gage (model WG-1). The CS3-W-KIT supports the use of a third-party Rain Switch, and/or a third-party Freeze Switch.

Calsense Flow Meters, model FM, are used with all Calsense irrigation controllers to monitor real-time flow of potable or non-potable water making them important tools in detecting mainline and lateral breaks on an irrigation system. Real-time system flows are learned automatically at night when irrigation...

The Calsense Circuit Breaker for Stainless Steel Enclosures, model SSE-BREAKER, is a 15-amp Square-D single-phase circuit breaker and housing. Designed to provide added electrical protection to the controller enclosure components and satisfy local or state requirements where necessary. Installed internally...

The Calsense ET Gage Enclosure, model ETGE, is a vandal-resistant enclosure that offers peace-of-mind that your ET Gage won't be damaged form tampering, vandalism, or animal interference.

The Calsense Tipping Rain Bucket, model RB-1, allows a CS3000 with the weather option, model CS3-W-KIT, to keep a record of accumulated rainfall. The Tipping Rain Bucket consists of a tipping mechanism that measures every 0.01-inches of rainfall. This information is passed to the CS3000 controller and,...